OC Essential default SBC Onboarding script

This script adds an Operator Connect service for a customer using the Service Providers' SIP Trunk (see Enabling Operator Connect License):

■

Applies a common Proxy Set for all services configured with specific Carrier Operator (Service Provider SIP Trunk).

■

Creates an IP Group towards customer side, with tag: "Trunk=<MsTenantId>" and previously configured Operator’s ProxySet and IP Profile.

■

Creates an IP Group towards Teams OC side, with tag: "Tenant=<MsTenantId>".

■

If you configure 'Carrier Registration', a rule is added to the Account Table for registration of the new IP Group towards the carrier IP Group.

■

All numbers uploaded for the customer service are added to the 'OCDialPlan' and are assigned the dial plan tag Trunk={{MsTenantId}} for SBC call leg and Tenant={{MsTenantId}} for the Teams call leg .

Copy

### Script Version OC 1.0 ###
# Onboarding OC Customer with Advanced Settings (IP Groups)
# 
configure voip
 ip-group new
  name "{{CustomerId}}-c"
  proxy-set-name "{{SBC.CarrierID}}" 
  ip-profile-name "{{SBC.CarrierID}}"
  tags "Trunk={{MsTenantId}}"
  classify-by-proxy-set disable
  call-setup-rules-set-id 5
  activate
 exit
 ip-group new 
  name "{{CustomerId}}-t"
  proxy-set-name "Teams-OC"
  ip-profile-name "Teams"
  outbound-mesg-manipulation-set 1 
  always-use-source-addr enable 
  tags "Tenant={{MsTenantId}}" 
  classify-by-proxy-set disable 
  call-setup-rules-set-id 4
  {{#if  SBC.EnableCAC}}    
   cac-profile "{{SBC.CacProfile}}"
  {{/if }} 
  activate 
 exit
 {{#if  SBC.FlagCarrierRegistration}}  
  sip-definition account new
   account-name "{{CustomerId}}"
   served-ip-group-name "{{CustomerId}}-t"
   serving-ip-group-name "{{CustomerId}}-c"
   user-name "{{SBC.CarrierUserName}}"
   password "{{SBC.CarrierPassword}}" 
   host-name "{{SBC.CarrierHostName}}"
   contact-user "{{SBC.CarrierMainLine}}"
   register reg
   application-type sbc
   activate
  exit
 {{/if }}
do write

Edit script and configure the following as required:

■

Firewall rules: Change the last rule to “Block” once you aligned everything according to your implementation

■

Quality of Experience settings

■

Classification Rules

■

SIP Interface and SIP Trunk source IPs

■

SIP Trunk Classification and Condition

■

Update Proxy Set addresses for "SIP Trunk"

■

Import Certificates (wildcard certificates for SBC can be found at Cert-Center repository). Retrieve the PFX password from the PFX Certificate Repository.

■

Message Manipulation: Change the value to the FQDN of the Operator Connect SBC.

■

Add CAC Profiles according to the customer’s needs

■

Add DNS IPs if required

■

Add local user account for Live Platform and UMP (see Adding UMP System Operator (Mandatory))

■

Add CAC Profiles according to the customer’s needs.

■

Add DNS IP addresses if required.

■

Enable floating licenses on the SBC as required

■

Save and Restart the SBC